Manual Full height Turnstile for entrance solution,workshop ISO9001
Features and Benefits
1. Access gate mechanic consist by two parts:Frame and Core.Signal
reading device would be install on the frame;main parts of core
include motor,main board,shift of the controller,fix
poles,turnstile supporting,turnstile,protection cover,fence,etc
2. Access direction:single or double direction(optional)
3.Self resetting function the system will cancel the people passing
right when reading the card but not passing,the time can be set
4. Prohibiting opposite direction passing
5. Automatic function of opening or closing when power off
6. Direction indicator function,showing passing or prohibiting for
7. Control board with counting function,LED digital display
8. Control board with memory function,can meet the groups pass
9. Without time delay require of the control signal thanks to adopt
optical hole focus technology
• Dry contact relay with 12 volt or 24 volt pulse
• Rs485, or Tcp-lp communication with computer
1. Fire-safety linkage: the turnstile will open automatically and
enter the emergency mode when the equipment receives the
fire-safety signal in the case of constant power supply.
2. Anti-pass-back: the machine can only move forward by default so
as to prevent illegal pass-back after the turnstile rod rotating
3. Passage under power failure: the equipment will automatically
drop its rod to ensure smooth operation under the city power
failure; after the recovery of power supply, the channel keep
1. Passage direction: the free setting of uni-direction or
bi-direction to control access, and uni-directional free passage,
bi-directional free passage or uni-directional card swiping passage
or bi-directional card swiping passage are allowed.
2. Turnstile rod reset: the turnstile rod will automatically reset
to its original position after pedestrians pass through.
3. Memory function: continuous swiping card allows corresponding
person to pass, and this is suitable for special occasions.
4. Passage reset: the turnstile will automatically close in case of
no one entry within limiting time after swiping card, and the
limiting time is adjustable.
1. Equipment compatibility: standard input/output interfaces for
the equipment are provided for the connection with various
identification system devices.
2. Remote control: it enables remote control and management
directly by supervisory computer via equipment serial ports, and is
able to detect equipment running state and modify operating
parameters in real time.
3. Passage indication: it is equipped with channel normally on LED
indicator and real-time passage LED lamp indication.